Hormann Ecostar Rsc2 tālvadības pults ritošais kods 433 Mhz

Two styles compatible remote control compatible HORMANN ECOSTAR100% compatible with ECOSTAR RSC2ECOSTAR RSE2Feature1. Free battery 2. Free coding instructions 3. Free key ring4. Heavy Duty Design5. Built-in battery6. Button cover1.Type of programming: Programming with receiver2.Number of channels: 43. Code: rolling code4. Frequency: 433.92 mhz5. Carrying range: 10-50 m (open space) 6. Power : 12V 27A7. Remote control comes with battery 8. Modulation mode: ASK (AM) 9. Power: 100mW 10. Working temperature: -20 C to +50 CA Security of use: dynamic code provides a high level of security, code that cannot be copied. Disclaimer: Your old remote must be the same as advertised, new remote is not compatible with other remotes. Includes: 1xRemote control 1xBattery 1xKeychain 1xEnglish manual How to program You need to press a button on the receiver (under cover or next to the motor in a separate box), then press a button on the new remote to register it. Materials Required Compatible Programming: Your Receiver 1. Open your receiver from the garage door. 2. Press the programming button. Inscription is usually: ENR, MEMO or PROG. 3. On some receivers it is necessary to hold down the programming button. 4. On the receiver, the LED indicates the start of programming mode. 5. Press compatible for one second on a button on the new remote control and release it again. 6. The receiver's LED will light differently or turn off to indicate successful programming. 7. Wait a few seconds to exit programming mode. Congratulations Your new remote control is programmed